BMWKK - F-16P28, TT-E-490E BLACK 27038
- MSDS: BMWKK
- Manufacturer: SEAGRAVE COATINGS CORP OF VA
- Product Name: F-16P28, TT-E-490E BLACK 27038
- National Stock Number: 8010-01-008-8154
Product Identification
Product ID:F-16P28, TT-E-490E BLACK 27038
MSDS Date:11/20/1990
FSC:8010
NIIN:01-008-8154
MSDS Number: BMWKK
Responsible Party
PORTSMOUTH, VA 23701
US
Emergency Phone: 804-488-4411
Info Phone: 804-488-4411
Cage: 60163
Contractor
Telephone: 757-397-2223
Cage: 60163
Ingredients
0.0 @ 20C.
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: <5%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC). VP
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: <20%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST
STODDARD SOLVENT; (MINERAL SPIRITS (PETROLEUM SOLVENT)).
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: <40%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: IRRITATION TO RESPIRATORY
TRACT, HEADACHE, DIZZINESS & NAUSEA. SKIN & EYE CONTACT: PRIMARY
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SENSITIVITY TO
SOLVENTS CAN CAUSE A HEIGHTENED REACTION TO EXPOSURE TO THIS
PRODUCT.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR, RESTORE BREATHING. CONSULT MD.
SKIN: FLUSH W/WATER. EYES: FLUSH IMMEDIATELY W/LARGE AMOUNTS OF
WATER FOR A MINIMUM OF 15 MINUTES. CONSULT MD. INGEST: CALL MD
IMMEDIATELY (F P N).
Fire Fighting
Flash Point Method:TCC
Flash Point:100F,38C
Lower Limits:1.1%
Upper Limits:6%
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER MAY BE USED TO COOL CLOSED CONTRS TO PVNT PRESS BUILD-UP &
POSS AUTOIGNIT/EXPLOS WHEN (SUPP DATA)
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID - CLASS II. KEEP
CONTRS TIGHTLY CLOSED. ISOLATE FROM HEAT/SPARKS/OPEN FLAME. CLOSED
CONTRS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:AVOID BREATHING SOLVENT VAPOR. ENSURE ADEQUATE
VENTILATION. AVOID SPARKS, FLAMES, AND ANYTHING WHICH COULD CAUSE
FIRE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY AREA WITH
VENTILATION SUITABLE FOR STORING MATERIALS IN INGREDIENT SECTION.
Other Precautions:PROVIDE RESPIRATORY PROTECTION AGAINST FUMES
GENERATED DURING BURNING.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD RESPIRATOR TYPES SUITABLE FOR
MATL IN INGREDIENT SECTION RECOMMENDED. NIOSH/MSHA APPRVD CHEM/MECH
FILTERS RECOMMENDED WHEN VENT IS RESTRICTED. NIOSH/MSHA APPRVD
AIRLINE TYPE RESPIRAT ORS/HOODS RECOMMENDED IN CONFINED AREAS.
Ventilation:SUFFICIENT VENT, IN VOL/PATTERN, SHLD BE PROVIDED TO KEEP
AIR CONTAM BELOW CURRENT APPLIC OSHA PEL OR ACGIH'S TLV LIMIT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE PROTECTIVE CREAMS WHERE SKIN CONTACT IS
LIKELY.
Work Hygienic Practices:REMOVE & WASH CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS BEFORE EATING OR SMOKING. SMOKE IN DESIGNATED
AREAS ONLY.
Supplemental Safety and Health
% VOLATILE: 40.9 (WT), 53.6 (VOL). FIRE FIGHT PROC: EXPOSED TO EXTREME
HEAT.
Chemical Properties
Boiling Pt:B.P. Text:302F,150C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK LIQUID W/ALIPHATIC SOLVENT ODOR.
Percent Volatiles by Volume:SUPDAT
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:AS WITH ANY OTHER ORGANIC MATERIAL,
COMBUSTION WILL PRODUCE CO*2 AND PROBABLY CO.
Hazardous Decomposition Products:OXIDIZING MATERIALS CAN CAUSE A
VIGOROUS REACTION.
Disposal
Waste Disposal Methods:SOAK LIQUIDS W/SAWDUST OR RAGS AND REMOVE. FLUSH
W/WATER IF POSSIBLE. AVOID SKIN CONTACT. DISPOSAL SHOULD BE IN
ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.